Skip to product information
1 of 3

Opel

Robot Electric Pump Relay Easytronic Opel Movano

Robot Electric Pump Relay Easytronic Opel Movano

Regular price €24,90 incl. VAT
€20,75 excl. VAT
Regular price Sale price €24,90 incl. VAT
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • New part, 1-year warranty
  • Diagnostic assistant by chat, 24/7

NEW relay for the electric pump of the Opel Easytronic Techshift automatic gearbox robot: 12 V, 4 pins, with diode. It replaces the original relay. Photo for illustration only: the relay colour may vary, with no effect on operation. 1-year warranty.

Compatibility

Opel Movano, 2003-2016, 2.5 CDTI, 2.3 CDTI.

Petrol, diesel, Twingo 1: the Quickshift parts compatibility guide.

Common symptoms

electric pump silent when the ignition is on (no pressure, no gears), electric pump running continuously even with the ignition off (relay stuck), battery draining, electric pump fuse blowing.

Related fault codes

DF065, DF252

Meaning:

  • DF065: pump relay circuit (pressure fault).

Full list: Quickshift fault codes (DF, DTC and P-code).

Confirm the diagnosis

  • You can drive and the gears engage? The electric pump works: look at the accumulator instead.
  • Direct test: power the electric pump with 12 V directly from the battery, using 2 wires. If it does not run, its motor is dead.
  • It runs, then stops: the pressure builds up, it works. With a diagnostic tool, it should start at around 40 bar and stop at around 50 bar.
  • It runs without ever stopping: either it no longer builds up pressure, or its control relay is stuck (code DF065, pump relay circuit).
  • It runs on the battery but never switches on in the car: the control relay or the pressure sensor is at fault. A diagnostic tool that reads the pressure will tell you which.

Guide with video: diagnose the gearbox in 8 seconds.

Step-by-step fitting

Supplied complete with its pump: the electric pump fits directly, with no part to transfer from the old one.

Tools: 10 mm socket, 13 mm open-ended spanner, Torx T30, large syringe, drip tray.

  1. Empty the reservoir with the syringe and place the drip tray under the electric pump.
  2. Depending on the vehicle, remove the driver's side headlight (10 mm socket): the electric pump comes out more easily that way.
  3. Loosen the rigid pipe nut (13 mm spanner) and unplug the connector.
  4. Remove the 2 upper T30 screws, then lever at the top with a large screwdriver to free the lower fixing. Take the assembly out.
  5. Fit the new electric pump, refit the upper screws, tighten the pipe with the 13 mm spanner and plug the connector back in.
  6. Oil level, cold: 38 mm above the reservoir joint. With the ignition on, it drops to the joint.

No bleeding or reprogramming: the air bubbles rise by themselves the first time the ignition is switched on.

Guide with video: fitting the electric pump.

Shipping, 1-year warranty and returns

Shipping costs: €18.24 to France; €30.41 with DPD or €32.44 with DHL to the other European countries we deliver to.

1-year warranty: all our new parts have a 1-year warranty. Keep your invoice.

Withdrawal: you have 14 days from receipt to return an unfitted part to us, in its original condition. The cost of this return is at your expense. The refund is made within 10 days of receiving the part.

• DPD
• DHL
View full details

Contact us

  • LeverAndCo

    Rue du Nauron
    79180 Chauray, France
    No collection on site

  • Chat

    Via the chat at the bottom right
    QUICK REPLY